technix wikidata

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Network setup ======

Utility "''netconf''" is amed to set up your network .

{{:mypic:frenzy-netconf.png?320x170|Утилита netconf}}

Having run "''netconf''" without parameters,  a menu to chose the module appears (lan, ppp, vpn, adsl). 

===== netconf lan =====

Module of local area network settings  After you've made choice a network interface card you'll need to enter ip address  for it, subnet mask, gateway, DNS-servers and domain name.

If some of them were specified earlier they will be  substituted in dialogue box automatically. 

If you use DHCP then you should enter "DHCP" instead of  IP address or enter nothing.

Settings will be saved and applied automatically.

  * Similar utility was called lan-config in Frenzy 0.3


===== netconf ppp =====

Dialup connection settings module.  Creating a new connection you should specify connection name, modem port, authoriation type (login or pap/chap), login and password and phone numbers (you can enter sever numbers one by one , empty line stands for the end of input).

After connections  saving  a new field "Connection with <connection name>" will be appeared , having chosen which a call will be executed. 

  * Similar utility was called ppp-config in Frenzy 0.3


===== netconf vpn =====

VPN connection settings module.

Creating a new connection you should connection name,  VPN server address, login and password and some other options (covpression, encryption, use it as the default gateway). 

After connections  saving  a new field "Connection with <connection name>" will be appeared , having chosen which an attempt to set up VPN connection will be performed. 

:!:Before setting a VPN connection you have to set up your LAN.
 

===== netconf adsl =====

ADSL connection settings module. 

Creating a new connection you should connection name,  network interface which ADSL-modem is attached to , login and password and some other options (use it as the default gateway, use NAT and DNS). 

After connections  saving  a new field "Connection with <connection name>" will be appeared , having chosen which an attempt to set up ADSL connection will be performed.
technix wikidata

User Tools

Site Tools

Page Tools
